Tenjan - high quality alloy steel tube supplier

We often hear customers complain that it is difficult to find suitable alloy steel tube suppliers, whether you are also in the procurement of alloy steel tube often encountered the following problems:
1. often procured alloy steel tube with fine rolling process, but the rolled tube has high strength, poor extension, easy to crack;
2. the procurement of alloy steel tube quality is not stable, 10 #, 20 # carbon steel are no problem, but replaced with alloy steel number, the quality is uneven, faulty;
3. poor raw materials, carbon steel plants have Zhongtian, Huaigang, but it is difficult to have a good round steel factory to process alloy steel raw materials;
4. mechanical properties are not controllable, tensile, strength to meet the requirements, the elongation is not reached, difficult to balance.

In fact, the above points for many customers, are part of the headache, then these phenomena appear because of what?

01 Difficulty in sourcing raw materials.

Alloy steel raw materials are difficult to buy, and it is even more difficult to find raw material manufacturers with stable quality.

Tenjan steel tube perennial purchase of alloy steel, and large round steel mills long-term cooperation, high-quality requirements, special alloy steel can be customized procurement, each batch of material with large round steel warranty certificate.

02 Insufficient equipment, no piercing, heat treatment
  Most of the small factories without perforation, even if there is perforation is only ordinary carbon steel, alloy steel less to do, usually only 10 #, 20 # such as carbon steel, perforation is good to wear, but also out of the output. Perforation is also to have a certain technology and experience to ensure that a good alloy steel tube.
  Heat treatment for alloy steel, is more critical, but many small factories have no heat treatment equipment, the performance of the material can not be guaranteed, more unable to meet the customized personalized needs of customers.

Tenjan Steel Tube independently reforms the piercing, heat treatment, cold drawing and finish rolling equipment, and produces independently from beginning to end, with layer by layer control.

03 Process immaturity

Small factory without cold-drawn, using finishing process mostly, and the mill is concerned about large deformation, low production costs, but the product is easy to crack, easy to bend, quality is not stable.

As a technical seamless steel tube manufacturer, Tenjan Steel tube has an annual alloy steel production capacity of more than 10,000 tons, with 10+ years of experience in each process, and a mature cold-drawing and finish-rolling process.

04 Technology is not available

Alloy steel is generally high tensile strength, low elongation, mechanical properties are difficult to control, easily lead to cracking. How to achieve a balance of tensile, yield, elongation, surface requirements has been a technical challenge.

Tenjan has overcome this challenge and not only can the mechanical properties be customized and balanced, but it has also been known to reduce the overall cost of the customer by 15%, giving the customer another level of competitiveness in the industry.